Logo

ASTM F1506-98

Historical Revision

Standard Performance Specification for Flame Resistant and Electric Arc Rated Protective Clothing Worn by Workers Exposed to Flames and Electric Arcs


Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


...

1.1 This performance specification covers the flame resistance of textile materials to be used for wearing apparel for use by electrical workers exposed to momentary electric arc and related thermal hazards.

Note 1—This performance specification does not cover coated fabrics commonly used in rainwear.

Note 2—At present, a bench scale arc test for laboratory use is not available. It is the intent of the committee to continue the search for an acceptable laboratory test based on either an electric arc exposure or an acceptable alternative, which will form the basis of a modification of this specification.

1.2 Materials used for basic protection levels are covered.

1.3 Protective properties relate to thermal exposure from momentary arc and associated exposure to open flame and radiant heat. (See Appendix X1.)

1.4 This performance specification covers wearing apparel design characteristics that relate specifically to protection from exposure to momentary electric arc and that relate to the utility of the wearing apparel.

Note 3—A number of other thermal test methods are under consideration and development and, when evaluated and proved effective by Committee F18, will be incorporated in either this specification or an appropriate alternative test method or specification.

1.5 This standard should be used to evaluate and describe the properties of materials, products, or assemblies in response to heat and flame under controlled laboratory conditions. It should not be used to describe or appraise the fire hazard or fire risk of materials, products, or assemblies under actual fire conditions

1.5.1 The results of this evaluation may be used as elements of a fire-risk assessment that takes into account all of the factors that are pertinent to an assessment of the fire hazard of a particular end use.

1.6 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

1.7 The following precautionary caveat pertains only to the test methods portion, Section 8, of this performance specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.


SDO ASTM: ASTM International
Document Number F1506
Publication Date April 10, 1998
Language en - English
Page Count 4
Revision Level 98
Supercedes
Committee F18.65
Publish Date Document Id Type View
March 1, 2022 F1506-22 Revision
Oct. 1, 2020 F1506-20A Revision
June 1, 2020 F1506-20 Revision
Dec. 1, 2019 F1506-19A Revision
Aug. 1, 2019 F1506-19 Revision
April 15, 2018 F1506-18 Revision
Nov. 15, 2017 F1506-17BE01 Revision
Nov. 15, 2017 F1506-17B Revision
Oct. 1, 2017 F1506-17A Revision
May 1, 2017 F1506-17 Revision
Nov. 1, 2015 F1506-15 Revision
Oct. 1, 2010 F1506-10A Revision
June 1, 2010 F1506-10 Revision
May 1, 2008 F1506-08 Revision
May 10, 2002 F1506-02AE01 Revision
May 10, 2002 F1506-02A Revision
March 10, 2002 F1506-02 Revision
March 10, 2002 F1506-01A Revision
March 10, 2002 F1506-01 Revision
March 10, 2002 F1506-00 Revision
April 10, 1998 F1506-98 Revision