Logo

ASTM D3930-08(2015)

Historical Reaffirmation

Standard Specification for Adhesives for Wood-Based Materials for Construction of Manufactured Homes

$91.00

$91.00

$163.80


Sub Total (1 Item(s))

$ 0.00

Estimated Shipping

$ 0.00

Total (Pre-Tax)

$ 0.00


Document Preview Not Available...

1.1 This specification provides the means to measure and evaluate the performance of adhesives for structural or semi-structural bonding of wood-to-wood in manufactured homes. Wood as used in this specification includes lumber, plywood, particleboard, gypsum board, and all materials having wood-based surfaces at the bondline. This specification does not cover other adhesives used in manufactured homes such as adhesives for carpet, floor tile, ceramic fixtures, plastic laminates, trim and millwork, and similar nonstructural applications.

1.1.1 The performance of the adhesives is measured in the following tests:

Number

Test

Section

 1

Low Temperature

16

 2

Dry Lumber

17

 3

Gap-Filling

18

 4

High Temperature

19

 5

Type 3 Qualification

20

 6

Type 2 Qualification

21

 7

Aging, Film Oxidation

22

 8

Aging, Bond Oxidation

23

 9

Resistance to Deformation, Creep

24

10

Mold

25

11

Type 1 Qualification

26

1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.


This specification provides the means to measure and evaluate the performance of adhesives for structural or semistructural bonding of wood-to-wood in manufactured homes. Wood as used in this specification includes lumber, plywood, particleboard, gypsum board, and all materials having woodbased surfaces at the bondline. The adhesives can be classified according to resistance to deformation: Group A or structural, and Group B or semistructural. Also, the adhesives may be designated into three types, according to their recommended use based on their resistance to water and water vapor: Type 1 for interior and exterior use, Type 2 for weather-protected interior use, and Type 3 for interior use only. Different tests shall be performed in order to determine the following properties of adhesives: shear strength, gap-filling ability, total deformation resistance, moisture and temperature limitation during fabrication, high-temperature resistance, low-temperature resistance, moisture resistance, aging, oxidation resistance, and mold resistance.


SDO ASTM: ASTM International
Document Number D3930
Publication Date April 1, 2015
Language en - English
Page Count 19
Revision Level 08(2015)
Supercedes
Committee D14.70
Publish Date Document Id Type View
April 1, 2005 D3930-08 Revision
April 10, 1999 D3930-93AR99E01 Revision
May 1, 2023 D3930-08R23 Reaffirmation
April 1, 2015 D3930-08R15 Reaffirmation
April 1, 2005 D3930-93AR05 Reaffirmation